Skip to main content
امرالد استون

Stone procurement

Travertine RFQ Template: Specify a Comparable Stone Order

Prepare a comparable travertine quotation with a practical RFQ checklist covering selection, dimensions, cut direction, packing and delivery scope.

An enquiry such as “Please quote cream travertine for our project” invites several different interpretations. One supplier may price selected slabs, another standard tiles, and another material with a different filling treatment. Each answer may be reasonable, yet the prices cannot be compared fairly.

This guide provides a practical enquiry structure and a short online enquiry form. For the wider supply discussion, see our Iranian travertine supplier page. Here, the goal is to turn your project requirements into a clear brief that suppliers can answer line by line.

The illustrations in this guide are illustrative, not records of an Emerald shipment, inspection or approved product. Printed identifiers and dimensions in an illustration do not define the material offered for your order.

1. Describe the application before asking for a price

Start with where the stone will be used: an interior wall, a floor, an exterior facade or another defined zone. Include the project location and the conditions relevant to that application. State whether drawings are preliminary or approved. A supplier needs to know whether you are exploring options or requesting a firm quotation against a completed specification.

Keep different applications on separate lines. A lobby floor and a facade may share a colour preference but require different technical review, finishes and fabrication details. Combining them into one quantity makes it harder to see which assumptions apply to which material.

Identify the person responsible for technical acceptance. The buyer can collect information, but thickness, panel dimensions, fixing and suitability must follow the project design. A quotation is not a substitute for that design. If a decision is pending, write “to be confirmed by the project designer” rather than inviting an unstated default.

2. Define the appearance you intend to approve

Colour names are useful starting points, not complete acceptance criteria. Give each reference sample a unique identifier and keep its photographs with the enquiry. Describe the acceptable range of shade, veining, visible cavities, filling and repairs. Where variation matters, use several agreed reference samples rather than one unusually uniform piece.

Ask the supplier to distinguish a general catalogue image from photographs of material proposed for this order. A photograph can support discussion, but lighting, wet surfaces and image processing can change how a stone looks. Approval should state what was actually reviewed and whether a physical sample or mockup is still required.

Avoid relying on labels such as “premium”, “export quality” or “Grade A” without a written definition. Ask what each description includes and excludes. Record how substitutions or a change of lot will be proposed and who must approve them before production continues.

3. Separate cut direction, finish and treatment

List cut direction and surface finish in different fields. They describe different choices. State the required vein-cut or cross-cut appearance, then specify the finish independently. If you need help discussing the visual options, consult the travertine cut guide and confirm your choice against identified samples.

For directional material, mark the intended orientation on the drawing. “Vein-cut” alone does not say which way the pattern should run on the installed wall. Include a layout reference if adjacent pieces must follow a sequence. Request confirmation that the proposed supply and cutting plan can meet that requirement.

Record whether the stone is filled or unfilled and ask for details of any filling, resin, backing or protective treatment proposed. Do not treat a treatment name as proof of performance. Ask what maintenance information accompanies the finished material and which decisions require a sample trial.

The Natural Stone Institute care guidance explains that impregnating treatments may improve stain resistance without making stone stain-proof. This is a reason to request a clear treatment description, not to replace project-specific selection with a general promise.

4. Make the size schedule unambiguous

Specify a unit for every dimension. Separate length, width and nominal thickness, and reference the drawing revision. For cut-to-size orders, include piece marks, quantities and any edge or opening details. For slabs, ask how dimensions and usable area will be recorded; a slab's outline and the area available for your cutting plan are different questions.

Ask the project team to define dimensional tolerances and the inspection method. Do not insert a universal tolerance simply because it appeared in another quotation. The receiving team needs an agreed basis for checking thickness and sizes, including where measurements are taken and how results are recorded.

Keep the net design quantity separate from any allowance for cutting, selection, breakage or retained spares. State who calculated each allowance. There is no useful single waste percentage for every layout: a directional pattern, openings and a complicated cutting schedule may change the order quantity.

Scroll horizontally to view all schedule fields.

Blank travertine size schedule to complete from project documents
ItemApplicationDrawing / revisionLengthWidthThicknessQuantityCut / finishOpen decision
AEnter zoneEnter referenceEnter value + unitEnter value + unitDesigner to confirmEnter pieces and areaEnter approved requirementsList unresolved point
BEnter zoneEnter referenceEnter value + unitEnter value + unitDesigner to confirmEnter pieces and areaEnter approved requirementsList unresolved point

This is a blank planning table, not a recommended size or thickness schedule. Complete it from your own project documents.

5. Ask for evidence tied to the proposed material

Request a list of available reports, identifying the tested sample, method, date and issuing laboratory. Ask the supplier to explain how those documents relate to the material and treatment being quoted. A report for a similarly named stone should not silently become evidence for a different product.

The Natural Stone Institute testing service lists physical-property and environmental-exposure tests as distinct services. Have the responsible specialist identify which evidence is relevant to your application. An impressive number in one report does not answer every question about the finished stone or its installation.

Make the approval sequence explicit: information review, sample review, any required testing, and approval to proceed. Assign an owner to each open question. If reports are unavailable, record that fact and seek a decision on the next step rather than filling the gap with an assumed result.

6. Separate packing, delivery and exclusions

Ask for a packing proposal linked to the size schedule. Request package identifiers, the proposed contents list, package dimensions and weights, and the handling information needed by the receiving team. The appropriate packing arrangement must be established for the actual material and transport plan; an illustration is not a loading specification.

Write down the requested delivery destination and the scope to be priced. Ask suppliers to identify which costs and activities are included, which are excluded and which remain subject to confirmation. Record the currency, quotation validity, payment milestones and assumptions affecting the proposed schedule.

Keep the requested arrival date separate from the supplier's proposed readiness and transport dates. Ask what starts the lead-time clock: sample approval, drawing approval, payment or another agreed event. Where the delivery arrangement or documentation requires specialist advice, resolve it with the responsible logistics professional before accepting the order.

7. Start an enquiry, then build the specification together

Start with the short form below. Your name and a phone number or email are enough to open the conversation; add a destination or quantity if you know it. The following points help develop the final specification together, rather than creating a worksheet you must complete before contacting us.

  • Enquiry reference and revision: project code, issue date and response deadline.
  • Application and destination: zones, site location and relevant exposure conditions.
  • Appearance reference: sample identifiers, acceptable variation and approval stage.
  • Material description: requested stone identity and any proposed alternatives.
  • Cut and finish: separate fields, with pattern direction and layout references.
  • Treatment: filling, resin, backing and protection to be declared by the supplier.
  • Size schedule: drawing revision, units, piece marks, thickness and tolerances.
  • Quantity basis: net requirement, allowances, spares and measurement basis.
  • Evidence requested: sample photographs, available reports and unresolved technical questions.
  • Packing and delivery: package information, destination, inclusions and exclusions.
  • Commercial response: currency, validity, payment milestones and schedule assumptions.
  • Deviations: supplier to list every difference from this enquiry separately.

Add this response instruction: “Please quote against the attached revision. Mark each requirement as included, excluded, proposed alternative or awaiting clarification. Do not replace an unresolved specification without identifying your assumption.”

8. Compare quotations with a simple example

Imagine a fictional interior-wall enquiry. Supplier A prices selected slabs but excludes cutting and packing. Supplier B prices marked, cut-to-size pieces with packing included. The unit rates differ, but neither rate alone tells you which proposal better meets the brief. This example describes no actual Emerald order or price.

First ask both suppliers to respond to the same size schedule, appearance reference and scope. Then compare stone, fabrication, packing and other quoted services separately. Keep unresolved items in a visible column instead of estimating them as zero.

If one proposal changes the finish or supplies an alternative lot, send it for the relevant approval before treating it as equivalent. The final comparison should distinguish a compliant response, a priced alternative and an incomplete response. This gives the buyer a clearer basis for discussion without pretending that the lowest initial number is the lowest complete cost.

Frequently asked questions

Can I send an RFQ before the drawings are final?

Yes, as a preliminary enquiry. Identify the drawing status and ask suppliers to state their assumptions. Request a revised quotation after the specifications are approved; do not treat an early estimate as a final order description.

Is a photograph enough to approve a travertine selection?

A photograph helps communicate appearance, but it does not establish every property or the full variation of a lot. State whether physical samples, a range of samples or a mockup must be approved and how that approval relates to the material supplied.

Should I ask for a standard slab thickness?

Record the thickness specified for your project, or mark it as pending design review. A widely offered thickness is not automatically suitable for every application, panel size or fixing arrangement.

What should I do when two offers use different grades?

Ask each supplier to define its grade against the same appearance references and acceptance requirements. Compare the definitions, not just the grade names. Record any proposed variation as an alternative requiring approval.

What should I send Emerald first?

Send the application, destination, drawings or size schedule, quantity, preferred appearance and the questions that remain unresolved. Include sample references if available. Commercial availability, timing and terms need confirmation for the actual enquiry.

Turn your requirements into a clear enquiry

A useful RFQ makes both the agreed requirements and the uncertainties visible. Start with the short enquiry form above; then identify the current drawing revision and keep the supplier's deviations with its quotation as the specification develops. You can also contact Emerald directly to discuss your travertine order.